Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM3160E _55 Steering _019697 POWER ASSIST SYSTEMS _0104490 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  C1541  Vehicle Speed Signal  


DESCRIPTION

The power steering ECU assembly receives vehicle speed signals from the skid control ECU (brake actuator assembly) via CAN communication. The ECU provides appropriate assist force in accordance with the vehicle speed based on the signals.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Note
C1541 Vehicle Speed Signal Vehicle speed signals via CAN communication are cut off for 3 seconds or more.
·

Brake control system

·

CAN communication system

·

Power steering ECU assembly


EPS warning light: Comes on -

CAUTION / NOTICE / HINT

NOTICE:

If the power steering ECU assembly has been replaced, perform assist map writing.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>CALIBRATION


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
DTC U0129 is not output. A
DTC U0129 is output. B



A

2.CHECK BRAKE CONTROL SYSTEM

B

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

2.CHECK BRAKE CONTROL SYSTEM
a.

Using the GTS, check for DTCs and confirm that there are no malfunctions in the brake control system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR

Chassis > ABS/VSC/TRAC > Trouble Codes
50001 105

Result:
Result Proceed to
DTCs are not output. A
DTCs are output. B



A

REPLACE POWER STEERING ECU ASSEMBLY

B