Home › Engine / Hybrid System › 1AR-FE INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)
RM3160E _51 Engine / Hybrid System _019675 1AR-FE INTAKE / EXHAUST _0104503 INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) A

1AR-FE INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)  REMOVAL  


PROCEDURE

Hide 17335 2.REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)

a.
A196059

Remove the 2 bolts, intake air control valve actuator (for TCV) and gasket from the intake manifold.

NOTICE:
·
A203084

Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or intake air control valve actuator (for TCV) at the locations marked by the circles in the illustration.

·
A197294

Do not loosen or remove the bolt and 2 nuts shown in the illustration.