Home › Engine / Hybrid System › 1AR-FE INTAKE / EXHAUST › EXHAUST PIPE
RM3160E _51 Engine / Hybrid System _019675 1AR-FE INTAKE / EXHAUST _0104506 EXHAUST PIPE A

1AR-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51442 2.REMOVE NO. 2 ENGINE UNDER COVER

Hide 58166 3.REMOVE FRONT FLOOR COVER LH

Hide 17430 5.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A314579

Remove the 2 bolts and 2 compression springs.


b.
A314578

Remove the tail exhaust pipe assembly from the 4 exhaust pipe supports.


c.

Remove the gasket from the center exhaust pipe assembly (TWC: Rear Catalyst).


Hide 17420 6.REMOVE CENTER EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

a.
A314577

Remove the 2 bolts and center exhaust pipe assembly (TWC: Rear Catalyst) from the front exhaust pipe assembly.


b.

Disconnect the center exhaust pipe assembly (TWC: Rear Catalyst) from the exhaust pipe support.


c.

Remove the gasket from the front exhaust pipe assembly.


Hide 17410 7.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A316037

Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly from the exhaust manifold converter sub-assembly (TWC: Front Catalyst).


b.

Remove the gasket from the exhaust manifold converter sub-assembly (TWC: Front Catalyst).