Home › Engine / Hybrid System › 2GR-FE EMISSION CONTROL › CANISTER › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019665 2GR-FE EMISSION CONTROL _0105530 CANISTER A

2GR-FE EMISSION CONTROL  CANISTER  REMOVAL  


PROCEDURE

Hide 17430 1.REMOVE TAIL EXHAUST PIPE ASSEMBLY

Hide 77765 2.REMOVE CHARCOAL CANISTER PROTECTOR

A199913

a.

Remove the 3 bolts and charcoal canister protector.


Hide 77740 3.REMOVE CANISTER (CHARCOAL CANISTER ASSEMBLY)

a.
A316048C01
2.656,0.688 2.688,0.531 2.688,0.531 2.792,0.531 true 2.823,0.458 3.073,0.75 0.25,0.292 10 false *a
*a Retainer
V100135

Pull Out
V100136

Pull Off


Disengage the 2 claws, pull out the retainer and pull off the vent line hose.

NOTICE:
·

Remove any dirt or foreign matter on the vent line hose before performing this work.

·

Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the vent line hose has an O-ring that seals the pipe.

·

Only disconnect the vent line hose by hand.

·

Do not forcibly bend, twist or turn the vent line hose.




b.
A316051C01
1.458,0.594 1.771,0.24 1.771,0.24 1.938,0.24 true 0.427,1.771 0.604,1.771 0.604,1.771 0.875,1.365 true 0.271,1.688 0.438,1.865 0.167,0.177 10 true *a 1.938,0.146 2.135,0.323 0.198,0.177 10 true *b
*a Purge Line Hose
*b Air Line Hose


Slide the clip and disconnect the purge line hose from the fuel tube.


c.

Slide the clip and disconnect the air line hose from the canister (charcoal canister assembly).


d.
A316052

Remove the 3 nuts, clip and canister (charcoal canister assembly).