Home › Engine / Hybrid System › 2GR-FE (INTAKE / EXHAUST) › EXHAUST PIPE › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019666 2GR-FE INTAKE / EXHAUST _0109814 EXHAUST PIPE A

2GR-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 17430 2.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A314579

Remove the 2 bolts and tail exhaust pipe assembly from the center exhaust pipe assembly (TWC: Rear Catalyst).


b.
A314578

Disconnect the tail exhaust pipe assembly from the 4 exhaust pipe supports.


c.

Remove the gasket from the center exhaust pipe assembly (TWC: Rear Catalyst).


Hide 17420 3.REMOVE CENTER EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

a.
A315139

Remove the 2 bolts, 2 compression springs and center exhaust pipe assembly (TWC: Rear Catalyst) from the front No. 3 exhaust pipe sub-assembly.


b.

Disconnect the center exhaust pipe assembly (TWC: Rear Catalyst) from the exhaust pipe support.


c.

Remove the gasket from the front No. 3 exhaust pipe sub-assembly.


Hide 89465 4.REMOVE HEATED OXYGEN SENSOR (for Bank 1)

Hide 89465 5.REMOVE HEATED OXYGEN SENSOR (for Bank 2)

Hide 17403 6.REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY

a.
A315140

Remove the 2 bolts, 2 nuts and front No. 3 exhaust pipe sub-assembly.


b.

Remove the 2 gaskets from the front No. 3 exhaust pipe sub-assembly.


Hide 17584B 7.REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Lower Side)

a.
A316014

Remove the 2 bolts and No. 1 exhaust pipe support bracket.


Hide 17410 8.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A316043

Remove the 2 nuts and front exhaust pipe assembly from the exhaust manifold sub-assembly LH (TWC: Front Catalyst).


b.

Remove the gasket from the front exhaust pipe assembly.