Home › Engine / Hybrid System › 2GR-FE LUBRICATION › OIL PRESSURE SWITCH › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019668 2GR-FE LUBRICATION _0105663 OIL PRESSURE SWITCH A

2GR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A304094C04
1.469,0.354 1.927,0.698 true 1.25,0.24 1.563,0.396 0.313,0.156 10 false *1
*1 Adhesive 1344


Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour of installation.



c.

Connect the engine oil pressure switch assembly connector.


d.

Connect the wire harness protector. (w/ Oil Cooler)


Hide 53736 4.INSTALL FRONT FENDER APRON SEAL RH

Hide 53875A 5.INSTALL FRONT FENDER LINER RH

Hide 51441 6.INSTALL NO. 1 ENGINE UNDER COVER

Hide 7.INSTALL FRONT WHEEL RH