Home › Engine / Hybrid System › 2GR-FE LUBRICATION › OIL PUMP › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019668 2GR-FE LUBRICATION _0105664 OIL PUMP A

2GR-FE LUBRICATION  OIL PUMP  REMOVAL  


PROCEDURE

Hide 12101 1.REMOVE OIL PAN SUB-ASSEMBLY

Hide 11302 2.REMOVE TIMING CHAIN COVER SUB-ASSEMBLY

a.
A128004C03
0.771,1.844 0.938,1.99 0.167,0.146 10 false *a 2.448,1.865 2.615,2.01 0.167,0.146 10 false *a
*a Nut


Remove the 23 bolts and 2 nuts shown in the illustration.


b.
A129690C06
0.5,4.135 1.344,4.427 1.344,4.427 2.917,4.083 false 1.906,0.646 0.729,2.24 0.729,2.24 0.729,1.125 false 2.438,0.969 0.729,2.24 false 0.583,2.292 0.76,2.49 0.177,0.198 10 false *a 1.25,4.469 1.427,4.667 0.177,0.198 10 false *a
*a Protective Tape


Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and cylinder head sub-assembly or cylinder block sub-assembly with a screwdriver.

NOTICE:

Be careful not to damage the contact surfaces of the cylinder head sub-assembly, cylinder block sub-assembly and timing chain cover sub-assembly.


HINT:

Tape the screwdriver tip before use.



c.
A128006

Remove the gasket.


Hide 11301C 3.REMOVE TIMING CHAIN CASE OIL SEAL

a.
A128007C03
1.573,0.865 1.365,0.313 1.365,0.313 1.167,0.313 true 1.958,1.104 0.969,1.573 0.969,1.573 0.781,1.573 true 1.01,0.219 1.583,0.5 0.573,0.281 10 false *a 0.615,1.49 1.063,1.76 0.448,0.271 10 false *b
*a Protective Tape
*b Wooden Block


Using a screwdriver, pry out the timing chain case oil seal.

HINT:

Tape the screwdriver tip before use.