Home › Engine / Hybrid System › 2GR-FE LUBRICATION › ENGINE OIL COOLER › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019668 2GR-FE LUBRICATION _0105665 ENGINE OIL COOLER A

2GR-FE LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 17105 3.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A315800C01
1.875,1.625 2.115,2.25 2.115,2.25 2.417,2.25 true 1.469,0.823 1.75,0.823 1.75,0.823 1.917,1 true 1.5,3 1.781,3 1.781,3 1.979,3.24 true 1.802,3.958 2.042,4.448 2.042,4.448 2.344,4.448 true 0.063,0.052 0.396,0.313 0.333,0.26 12 false *A 0.104,2.333 0.406,2.583 0.302,0.25 12 false *B 1.26,0.74 1.552,0.927 0.292,0.188 10 true *1 2.469,2.167 2.677,2.406 0.208,0.24 10 true *2 1.313,2.917 1.604,3.104 0.292,0.188 10 true *1 2.396,4.354 2.604,4.594 0.208,0.24 10 true *2
*A Type A
*B Type B
*1 No. 4 Water By-pass Hose
*2 No. 5 Water By-pass Hose


Remove the bolt.


b.

Disengage the 2 clamps to remove the 2 hose clamps.


c.

Slide the 4 clips and remove the No. 4 water by-pass hose and No. 5 water by-pass hose.


d.
A136292

Remove the oil cooler union bolt, oil cooler assembly and O-ring.