Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › KNOCK SENSOR
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106858 KNOCK SENSOR A

1AR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 89615 2.REMOVE KNOCK CONTROL SENSOR

a.
A195081

Disconnect the knock control sensor connector.


b.

Remove the bolt and knock control sensor from the cylinder block sub-assembly.

NOTICE:

If the knock control sensor has been struck or dropped, replace it.