Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106859 AIR FUEL RATIO SENSOR A

1AR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


PROCEDURE

Hide 17167 1.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 89467B 2.REMOVE AIR FUEL RATIO SENSOR

a.
A313523

Disengage the hose clamp and separate the air fuel ratio sensor wire from the No. 1 radiator hose.


b.

Disconnect the air fuel ratio sensor connector.


c.
A315108
1.156,1.604 2.115,1.604 true 0.823,1.521 1.146,1.698 0.323,0.177 10 true SST

Using SST, remove the air fuel ratio sensor from the exhaust manifold.

SST
09224-00010  

NOTICE:

If the air fuel ratio sensor has been struck or dropped, replace it.