Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106863 CAMSHAFT OIL CONTROL VALVE A

2GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 17190 1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY

Hide 2.SEPARATE WIRE HARNESS

a.

for Bank 1:

i.
A315073

Disengage the wire harness clamp to separate the wire harness.



b.

for Bank 2:

i.
A313542

Disengage the 2 wire harness clamps to separate the wire harness.



Hide 3.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)

a.
A315074

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A158211

Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 4.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)

a.
A315075

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A158212

Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 5.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)

a.
A315071

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly LH.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly LH).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A158212

Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 6.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)

a.
A315072

Remove the bolt and wire harness clamp bracket from the cylinder head cover sub-assembly LH.


b.

Disconnect the camshaft timing oil control valve assembly connector.


c.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly LH.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly LH).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




d.
A315111

Remove the O-ring from the camshaft timing oil control valve assembly.