17190
1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY
11401M
2.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side of Bank 1)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
If the camshaft position sensor has been struck or dropped, replace it.
11401M
3.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side of Bank 1)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
If the camshaft position sensor has been struck or dropped, replace it.
11401M
4.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side of Bank 2)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly LH.
If the camshaft position sensor has been struck or dropped, replace it.
11401M
5.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side of Bank 2)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly LH.
If the camshaft position sensor has been struck or dropped, replace it.