Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106870 IGNITION COIL AND SPARK PLUG A

2GR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 17190 1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY

Hide 19500 2.REMOVE IGNITION COIL ASSEMBLY

a.
A313540

Disengage the 2 wire harness clamps.


b.

Disconnect the 6 ignition coil assembly connectors.


c.
A134966C01
0.115,0.115 0.406,0.344 0.292,0.229 12 true *A 0.135,2.667 0.427,2.906 0.292,0.24 12 true *B
*A for Bank 2
*B for Bank 1


Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.

NOTICE:

If an ignition coil assembly has been struck or dropped, replace it.


HINT:

Arrange the removed parts in the correct order.



Hide 19100P 3.REMOVE SPARK PLUG

a.

Remove the 6 spark plugs from the cylinder head sub-assembly.

NOTICE:

If a spark plug has been struck or dropped, replace it.


HINT:

Arrange the removed parts in the correct order.