Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106871 ENGINE COOLANT TEMPERATURE SENSOR A

2GR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 11209 2.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 89422 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A315087

Disconnect the engine coolant temperature sensor connector.


b.

Using a 19 mm union nut wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

NOTICE:

If the engine coolant temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine coolant temperature sensor.