Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › KNOCK SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106872 KNOCK SENSOR A

2GR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 89615 2.REMOVE KNOCK CONTROL SENSOR

a.
A129615C01
0.604,0.74 1.031,0.74 1.031,0.74 1.604,1.333 true 2.167,1.333 2.688,1.76 2.688,1.76 3.083,1.76 true 0.354,0.635 0.604,0.844 0.25,0.208 12 true *A 3.115,1.667 3.354,1.885 0.24,0.219 12 true *B
*A for Bank 1
*B for Bank 2


Disconnect the 2 knock control sensor connectors.


b.

Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.

NOTICE:

If the knock control sensor has been struck or dropped, replace it.