Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › HEATED OXYGEN SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106874 HEATED OXYGEN SENSOR A

2GR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR  REMOVAL  


PROCEDURE

Hide 89465 1.REMOVE HEATED OXYGEN SENSOR (for Bank 2)

a.
A315096

Disengage the 3 wire harness clamps.


b.

Disconnect the heated oxygen sensor connector.


c.
A315097N01
1.844,0.938 2.365,0.5 2.365,0.5 2.719,0.51 true 2.771,0.427 3.115,0.615 0.344,0.188 10 true SST

Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST
09224-00010  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.



Hide 89465 3.REMOVE HEATED OXYGEN SENSOR (for Bank 1)

a.
A315099

Disengage the 4 wire harness clamps.


b.

Disconnect the heated oxygen sensor connector.


c.
A315100

Remove the wire harness clamp bracket from the heated oxygen sensor.


d.
A315101N01
1.365,0.813 2.24,0.813 true 2.292,0.74 2.615,0.938 0.323,0.198 10 true SST

Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST
09224-00010  

NOTICE:

If the heated oxygen sensor has been struck or dropped, replace it.