Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019716 INTERIOR PANELS / TRIM _0107108 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 86101J 1.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Normal Roof)

Hide 86101J 2.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Sliding Roof)

Hide 86300B 3.REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY

Hide 863C0 4.REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY (w/ DAB Function)

Hide 5.REMOVE REAR WASHER HOSE ASSEMBLY (for Normal Roof)

a.

w/ Adhesive Tape:

i.

Remove the adhesive tape from the roof headlining assembly.

B367802C01
2.552,1.448 2.813,1.677 0.26,0.229 12 true *A
*A w/ Adhesive Tape - -




b.

Remove the rear washer hose assembly from the roof headlining assembly.


Hide 6.REMOVE REAR WASHER HOSE ASSEMBLY (for Sliding Roof)

a.

w/ Adhesive Tape:

i.

Remove the adhesive tape from the roof headlining assembly.

B367799C01
2.531,1.448 2.792,1.688 0.26,0.24 12 true *A
*A w/ Adhesive Tape - -




b.

Disengage each clamp and remove the rear washer hose assembly from the roof headlining assembly.


Hide 7.REMOVE AIR DUCT SEAL

HINT:

Use the same procedure for all air duct seals.


a.
B360488

Remove the air duct seal.


Hide 81390C 8.REMOVE SPOT LIGHT ASSEMBLY LH

Click hereVehicle Interior>LIGHTING (INT)>ROOM LIGHT>REMOVAL

HINT:

Use the same procedure for the front side and rear side.


Hide 81360K 9.REMOVE SPOT LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 63398 10.REMOVE ROOF HEADLINING SUPPORT PLATE (for Normal Roof)

a.

Remove the 2 roof headlining support plates.

B360490


Hide 63398 11.REMOVE ROOF HEADLINING SUPPORT PLATE (for Sliding Roof)

a.

Remove the 2 roof headlining support plates.

B360492


Hide 82171 12.REMOVE NO. 1 ROOF WIRE (for Normal Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B360500
0.125,0.167 0.5,0.406 0.375,0.24 12 false *A 1.125,0.167 1.5,0.406 0.375,0.24 12 false *B 2.125,0.177 2.5,0.417 0.375,0.24 12 false *C
*A w/ EC Mirror *B w/ Rain Sensor without Lane Departure Alert System
*C w/ Rain Sensor with Lane Departure Alert System - -
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

B361350
0.25,0.333 0.625,0.583 0.375,0.25 12 false *A 1.594,0.333 2,0.552 0.406,0.219 12 false *B 0.271,1.833 0.583,1.99 0.313,0.156 12 false *C
*A w/ EC Mirror *B w/ Rain Sensor without Lane Departure Alert System
*C w/ Rain Sensor with Lane Departure Alert System - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 13.REMOVE NO. 1 ROOF WIRE (for Sliding Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B361340
0.333,0.177 0.708,0.417 0.375,0.24 12 false *A 1.833,0.167 2.208,0.406 0.375,0.24 12 false *B 0.375,1.427 0.75,1.667 0.375,0.24 12 false *C 1.833,1.417 2.208,1.656 0.375,0.24 12 false *D 4.375,0.917 4.75,1.156 0.375,0.24 12 false *E
*A w/ EC Mirror *B for RHD with Lane Departure Alert System
*C for LHD with Rain Sensor *D for LHD with Lane Departure Alert System
*E w/ Rear Seat Entertainment System - -
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

B361356
0.167,0.094 0.542,0.333 0.375,0.24 12 false *A 1.5,1.427 1.875,1.667 0.375,0.24 12 false *D 0.167,1.417 0.542,1.656 0.375,0.24 12 false *C 1.5,0.094 1.875,0.333 0.375,0.24 12 false *B
*A w/ EC Mirror *B for RHD with Lane Departure Alert System
*C for LHD with Rain Sensor *D for LHD with Lane Departure Alert System



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.