1.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
55846A
2.REMOVE NO. 4 HEATER TO REGISTER DUCT (for LHD)
55843A
3.REMOVE NO. 1 HEATER TO REGISTER DUCT (for RHD)
86101
4.REMOVE ANTENNA CORD SUB-ASSEMBLY
for LHD:
Disengage the 4 clamps and remove the antenna cord sub-assembly.
for RHD:
Disengage the 4 clamps and remove the antenna cord sub-assembly.
5.REMOVE ROOF HEADLINING ASSEMBLY
86101J
6.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Normal Roof)
Disconnect the connector.
|
Adhesive Tape |
|
Front |
Disengage each clamp.
Remove the adhesive tape from the roof headlining assembly.
Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.
86101J
7.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Sliding Roof)
Disconnect each connector.
| *A | w/ DAB Function | - | - |
|
Adhesive Tape |
|
Front |
Disengage each clamp.
Remove the adhesive tape from the roof headlining assembly.
Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.