Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › TCM › 2013.12–2016.11
RM3160E _52 Drivetrain _019725 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0107331 TCM A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  TCM  INSTALLATION  


PROCEDURE

Hide 89530C 1.INSTALL TCM

a.

Temporarily install the TCM to the automatic transaxle assembly with the 2 bolts.


b.
C296224N01
1.917,0.115 2.073,0.313 0.156,0.198 10 true 1 1.25,0.104 1.406,0.302 0.156,0.198 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)


c.
C296225

Connect the TCM connector.


d.

Turn the lock lever to secure the connector.


Hide 17701 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 17801 3.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17705 4.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 17750A 5.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 53295E 6.INSTALL COOL AIR INTAKE DUCT SEAL

Hide 53298E 7.INSTALL RADIATOR SIDE SEAL RH

Hide 53299D 8.INSTALL RADIATOR SIDE DEFLECTOR SEAL LH

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 10.CHECK AUTOMATIC TRANSAXLE SYSTEM

NOTICE:

If automatic transaxle parts have been replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary.

Click hereDrivetrain>U660E AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSAXLE SYSTEM>PRECAUTION