89530C
1.INSTALL TCM
Temporarily install the TCM to the automatic transaxle assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Connect the TCM connector.
Turn the lock lever to secure the connector.
17701
2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17801
3.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17705
4.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
17750A
5.INSTALL INLET AIR CLEANER ASSEMBLY
53295E
6.INSTALL COOL AIR INTAKE DUCT SEAL
53298E
7.INSTALL RADIATOR SIDE SEAL RH
53299D
8.INSTALL RADIATOR SIDE DEFLECTOR SEAL LH
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
10.CHECK AUTOMATIC TRANSAXLE SYSTEM
If automatic transaxle parts have been replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary.
Click hereDrivetrain>U660F AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSAXLE SYSTEM>PRECAUTION