Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM(for 2GR-FE) › 2013.12–2016.11
RM3160E _53 Suspension _019689 FRONT SUSPENSION _0107983 FRONT LOWER SUSPENSION ARM(for 2GR-FE) A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM(for 2GR-FE)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48069 1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.


b.
C292270N01
0.833,0.823 0.969,1.021 0.135,0.198 10 true 1 1.438,0.51 1.542,0.688 0.104,0.177 10 true 2 2.583,1.208 2.719,1.406 0.135,0.198 10 true 3

Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt 1, 2 : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt 3 : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



Hide 12372A 2.INSTALL ENGINE MOUNTING INSULATOR