Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for RHD)
RM3160E _54 Brake _019693 BRAKE SYSTEM (OTHER) _0108087 BRAKE PEDAL(for RHD) N

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for RHD)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT AND ADJUST BRAKE PEDAL HEIGHT

HINT:

Inspect and adjust the brake pedal height with the floor carpet folded back.


a.

Check the brake pedal height.

i.

Measure the shortest distance between the brake pedal pad surface and No. 2 dash panel insulator pad as shown in the illustration.

C294883
1.646,1.906 1.115,1.906 true 5.677,1.844 5.146,1.844 true 3.208,1.198 2.677,1.198 true 6.781,1.292 6.25,1.292 false 6.813,1.198 7.063,1.375 0.25,0.177 10 true *1 0.906,1.823 1.219,1.979 0.313,0.156 10 false *b 4.958,1.771 5.271,1.927 0.313,0.156 10 false *b 1.844,1.469 2.156,1.625 0.313,0.156 10 false *a 6.365,1.823 6.677,1.979 0.313,0.156 10 false *a 3.26,1.115 3.51,1.292 0.25,0.177 10 true *1
*1 Brake Pedal Pad - -
*a Brake Pedal Height *b Measuring Plane of No. 2 Dash Panel Insulator Pad


Brake Pedal Height from No. 2 Dash Panel Insulator Pad:

170.1 to 180.1 mm (6.70 to 7.09 in.)


If the brake pedal height is not as specified, inspect and adjust the push rod length according to the procedure below.



b.

Adjust the push rod length.

i.
C294882
1.844,3.635 0.875,3.635 true 2.885,1.271 2.552,1.271 false 1.906,2.313 1.906,1.833 false 2.917,1.177 3.229,1.333 0.313,0.156 10 false *1 1.854,2.344 2.167,2.5 0.313,0.156 10 false *2 2.771,3.625 3.083,3.781 0.313,0.156 10 false *a 0.688,3.573 1,3.729 0.313,0.156 10 false *3
*1 Stop Light Switch Assembly
*2 Lock Nut
*3 No. 2 Dash Panel Insulator Pad
*a Brake Pedal Height


Remove the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>REMOVAL


ii.

Loosen the lock nut and adjust the brake pedal height by turning the push rod to achieve the correct height.

Brake Pedal Height from No. 2 Dash Panel Insulator Pad:

170.1 to 180.1 mm (6.70 to 7.09 in.)



iii.

Tighten the lock nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)


iv.

Install the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION



Hide 2.INSPECT BRAKE PEDAL FREE PLAY

a.

Stop the engine and firmly depress the brake pedal several times until no vacuum is left in the brake booster assembly.


b.
C132708
2.167,1.563 2.469,1.781 0.302,0.219 10 false *a
*a Brake Pedal Free Play


Depress the brake pedal until a slight resistance is felt. Measure the distance as shown in the illustration.

Brake Pedal Free Play:

1.0 to 2.0 mm (0.0394 to 0.0787 in.)


If the brake pedal free play is not as specified, check the stop light switch clearance.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION

If the brake pedal free play is as specified, proceed to the Inspect Brake Pedal Reserve Distance procedure.


Hide 3.INSPECT BRAKE PEDAL RESERVE DISTANCE

a.

Release the parking brake.


b.

With the engine running, depress the brake pedal and measure the brake pedal reserve distance as shown in the illustration.

C294884
1.656,1.927 1.01,1.927 true 3.125,1.313 2.729,1.313 true 6.281,1.583 5.885,1.583 false 5.719,2.052 5.115,2.052 true 3.177,1.24 3.365,1.406 0.188,0.167 10 true *1 1.573,1.458 1.802,1.635 0.229,0.177 10 false *a 0.823,1.854 1.135,2.01 0.313,0.156 10 false *b 6.333,1.51 6.521,1.677 0.188,0.167 10 true *1 6.323,2.156 6.552,2.333 0.229,0.177 10 false *a 4.927,1.979 5.24,2.135 0.313,0.156 10 false *b
*1 Brake Pedal Pad - -
*a Brake Pedal Reserve Distance *b Measuring Plane of No. 2 Dash Panel Insulator Pad


Brake Pedal Reserve Distance from No. 2 Dash Panel Insulator Pad at 490 N (50 kgf, 110.2 lbf):

More than 102 mm (4.02 in.)


If the distance is not as specified, troubleshoot the brake system.

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE SYSTEM>PROBLEM SYMPTOMS TABLE