Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0106953 STOP LIGHT SWITCH A

LIGHTING (EXT)  STOP LIGHT SWITCH  INSTALLATION  


PROCEDURE

Hide 84340 1.INSTALL STOP LIGHT SWITCH ASSEMBLY

a.
E167768

Insert the stop light switch assembly until the threaded sleeve hits the pedal.

NOTICE:

When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.



b.
E259461
1.542,1.979 1.854,2.177 0.313,0.198 10 false A

Turn the stop light switch assembly a quarter turn clockwise to install the stop light switch assembly.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)

or less


NOTICE:

When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.



c.

Connect the connector.


d.

Check the protrusion of the plunger.

Part Measurement
A 0.5 to 2.4 mm (0.0197 to 0.0945 in.)

If the protrusion is not as specified, recheck switch installation and inspect brake pedal adjustment if necessary.

for LHD:

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL(for LHD)>ADJUSTMENT


for RHD:

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL(for RHD)>ADJUSTMENT


NOTICE:

Do not depress or support the brake pedal.



Hide 55606 2.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY