85310C
1.INSTALL WASHER MOTOR AND PUMP ASSEMBLY
Install the washer motor and pump assembly as shown in the illustration.
Connect the connector.
Connect the washer hose.
2.ADD WASHER FLUID
Add washer fluid to the washer jar.
53875A
3.INSTALL FRONT FENDER LINER RH
| *a | Screws (A) |
| *b | Screws (B) |
| *c | Bolt |
Install the front fender liner RH with the 2 screws (A) and 5 screws (B).
Install the bolt.
Install 2 new grommets.
| *a | Clip (A) |
| *b | Clip (B) |
| *c | Clip (C) |
Install the clip (A).
Install the 4 clips (B).
w/o Mudguard:
Install the clip (C).
53851D
4.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Install the front wheel opening extension pad RH with the 3 screws.
5.INSTALL FRONT WHEEL RH
75085A
6.INSTALL FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING(for Front Side)>INSTALLATION