86120L
1.INSTALL NAVIGATION RECEIVER ASSEMBLY
86211J
2.INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 3 screws.
86212C
3.INSTALL NO. 2 RADIO RECEIVER BRACKET
Install the No. 2 radio receiver bracket with the 3 screws.
4.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Engage the 2 claws and 2 clips to temporarily install the navigation receiver assembly with bracket.
Install the navigation receiver assembly with bracket with the 4 bolts.
55680A
5.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55670
6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55422C
7.INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
8.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
10.REPLACED OPERATION