Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR MAIN SWITCH › 2013.12–2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0108152 BLIND SPOT MONITOR MAIN SWITCH A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR MAIN SWITCH  REMOVAL  


PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE

Hide 62112A 2.REMOVE COWL SIDE TRIM SUB-ASSEMBLY

Hide 3.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 55436A 4.REMOVE INSTRUMENT PANEL FINISH PANEL END

Hide 55606 5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 53601 6.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55045 7.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Hide 84470 8.REMOVE BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY (WARNING CANCELING SWITCH ASSEMBLY)

a.

for LHD:

i.
E287599

Disengage the 2 claws and remove the blind spot monitor main switch assembly (warning canceling switch assembly).



b.

for RHD:

i.
E287601

Disengage the 2 claws and remove the blind spot monitor main switch assembly (warning canceling switch assembly).