Home › Vehicle Exterior › DOOR / HATCH › BACK WINDOW SUPPORT
RM3160E _59 Vehicle Exterior _019719 DOOR / HATCH _0108199 BACK WINDOW SUPPORT A

DOOR / HATCH  BACK WINDOW SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 68940 1.REMOVE BACK WINDOW STAY ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the back window stay assembly in order to prevent the piston rod from deforming.



a.
B363207
2.615,2.708 2.875,2.656 true 0.49,0.802 0.719,0.948 true 0.74,0.854 1.01,1.01 0.271,0.156 10 true *a 2.427,2.604 2.698,2.76 0.271,0.156 10 true *a 0.156,0.938 0.313,1.135 0.156,0.198 10 true 1 3.115,2.406 3.271,2.604 0.156,0.198 10 true 1 0.219,0.135 0.375,0.333 0.156,0.198 10 true 2 3.104,2.948 3.26,3.146 0.156,0.198 10 true 2
*a Protective Tape


Using a screwdriver, remove the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joints and remove the back window stay assembly.

NOTICE:

Remove the back window stay assembly while supporting the back door glass by hand.



Hide 2.REMOVE REAR SPOILER SUB-ASSEMBLY

Hide 69942 3.REMOVE BACK DOOR GLASS GUIDE UPPER BRACKET

a.
B363208

Remove the 2 screws and back door glass guide upper bracket.


Hide 68961J 4.REMOVE BACK WINDOW STAY BOLT

a.
B363209

Remove the back window stay bolt.