Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109635 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  REMOVAL  


PROCEDURE

Hide 85110R 1.REMOVE REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type)

Hide 69806 2.REMOVE BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)

Hide 76088B 3.REMOVE REAR SIDE SPOILER SUB-ASSEMBLY LH

a.
B362504

Remove the 2 bolts.


b.
B362505

Disengage the 3 claws to remove the rear side spoiler sub-assembly LH.


Hide 76087B 4.REMOVE REAR SIDE SPOILER SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 5.REMOVE REAR SPOILER SUB-ASSEMBLY

a.
B362506C01
1.427,0.938 1.729,0.927 false
V100155

Protective Tape


Apply protective tape around the rear spoiler sub-assembly.


b.

Disconnect the wire harness.

NOTICE:

Do not allow the disconnected wire harness to get caught between the back door and vehicle body to prevent it from being damaged.


i.

Turn back the wire harness grommet.


ii.
B362509

Disengage the 4 claws and pull out the wire harness from the vehicle body.

NOTICE:

Do not forcibly pull the wire harness.



iii.
B362510

Disconnect the connector.


iv.

Disconnect the rear washer hose.


v.
B365112

Disengage the grommet (for Glass Hatch Type).


vi.
B362511

Disconnect the connector (for Glass Hatch Type).



c.

Remove the 6 bolts.

B362507


d.

Disengage the 2 claws.

B362508


e.
B362513

Raise and lower the glass hatch and the back door respectively. Pull out the wire harness from the vehicle body and remove the rear spoiler sub-assembly.