Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat)
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0100667 REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) A

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat)  INSTALLATION  


PROCEDURE

Hide 73380D 1.INSTALL REAR SEAT INNER BELT ASSEMBLY

a.
B362457
2.24,2.75 1.49,2.219 1.49,2.219 2.885,2.531 true 1.26,2.115 1.458,2.313 0.198,0.198 10 true *a
*a Protruding Part


Install the rear seat inner belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the seatback frame.



b.
B362459
1.885,2.052 2.823,2.01 true 2.854,1.938 3.104,2.135 0.25,0.198 10 false *a
*a Rubber Band


Pass the rear seat inner belt assembly through the rubber band of the rear seat cushion assembly as shown in the illustration.


c.

w/ Seat Belt Warning System:

i.

Connect each connector.


ii.

Engage each clamp.


iii.

Install 2 new wire harness clamps.


iv.
B368732
1.344,1.104 1.438,1.323 1.438,1.323 1.615,1.125 false 2.448,1.115 2.76,1.271 0.313,0.156 10 false *a 1.385,1.365 1.719,1.615 0.333,0.25 10 false *b
*a Hook
*b Hog Ring


Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration.




v.

Engage the hook.



Hide 71828B 2.INSTALL REAR SEAT REAR CUSHION MOULDING RH