Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109284 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  INSTALLATION  


PROCEDURE

Hide 88211B 1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

a.
E287771
2.552,0.844 2.708,1.042 0.156,0.198 10 true 1 0.24,0.292 0.396,0.49 0.156,0.198 10 true 2 2.177,2.74 2.333,2.938 0.156,0.198 10 true 3

Engage the 2 guides and install the millimeter wave radar sensor assembly with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



b.

Engage the clamp.


c.

Connect the connector.