Home › Engine / Hybrid System › CRUISE CONTROL › DRIVING SUPPORT ECU(for RHD) › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109287 DRIVING SUPPORT ECU(for RHD) A

CRUISE CONTROL  DRIVING SUPPORT ECU(for RHD)  INSTALLATION  


PROCEDURE

Hide 88150A 1.INSTALL DRIVING SUPPORT ECU ASSEMBLY

a.

Engage the claw to install the driving support ECU assembly.


Hide 82878 2.INSTALL ECU INTEGRATION BOX LH

a.

Install the ECU integration box RH with the bolt and 2 nuts.


b.

Engage the 2 clamps.


c.

Connect each connector.


Hide 55303B 3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55436A 5.INSTALL INSTRUMENT PANEL FINISH PANEL END LH

Hide 6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62112A 7.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 67914 8.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION