Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › DRIVE BELT › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019663 2GR-FE ENGINE MECHANICAL _0109577 DRIVE BELT A

2GR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 53875A 2.SEPARATE FRONT FENDER LINER RH

a.

Remove the bolt, 4 screws and 4 clips and separate the front fender liner RH.


Hide 53736 3.REMOVE FRONT FENDER APRON SEAL RH

Hide 16361A 4.REMOVE V-RIBBED BELT

a.
A205850C01
2.292,3.552 2.51,3.75 0.219,0.198 10 true *a
*a 5 mm Bi-hexagon Wrench


Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise.


b.

While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to secure the V-ribbed belt tensioner.


c.

Remove the V-ribbed belt from the V-ribbed belt tensioner.