11301C
1.INSTALL TIMING CHAIN CASE OIL SEAL
| *a | Oil Seal Installation Depth |
Apply MP grease to the lip of a new timing chain case oil seal.
Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.
0 to 1.0 mm (0 to 0.0394 in.)
Keep the lip free from foreign matter.
Do not tap in the timing chain case oil seal at an angle.
13471
2.INSTALL CRANKSHAFT PULLEY
Install the pulley set key to the crankshaft.
Align the pulley set key with the key groove of the crankshaft pulley.
| *a | Hold |
|
Turn |
Using SST, install the crankshaft pulley bolt.
16361A
3.INSTALL V-RIBBED BELT