81490C
1.REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)
81480A
2.REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)
Use the same procedure as for the LH side.
82183
3.REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Rear Fog Light)
Disengage the 8 clamps to remove the No. 3 luggage room wire.
89341A
4.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL
Use the same procedure for all the No. 1 ultrasonic sensors.
89359
5.REMOVE ULTRASONIC SENSOR BEZEL (w/ TOYOTA Parking Assist-sensor System)
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL
Use the same procedure for all the ultrasonic sensor bezels.
82183
6.REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
Disengage the 11 clamps to remove the No. 3 luggage room wire.
81490E
7.REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)
Remove the 2 screws.
Disengage 2 claws to remove the reflex reflector assembly LH.
81480D
8.REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)
Use the same procedure as for the LH side.
52615
9.REMOVE REAR BUMPER ENERGY ABSORBER
Disengage the 7 claws and remove the rear bumper energy absorber.
52151G
10.REMOVE REAR BUMPER EXTENSION
Remove the screw.
Remove the 5 clips.
Disengage the 10 claws and 2 guides to remove the rear bumper extension.
52169C
11.REMOVE LOWER REAR BUMPER COVER
Remove the 2 screws.
Remove the 2 clips.
Disengage the 14 claws to remove the lower rear bumper cover.
75895B
12.REMOVE NO. 2 MOULDING TAPE
Remove the No. 2 moulding tape.
Use the same procedure for the RH side and LH side.
52156A
13.REMOVE REAR BUMPER SIDE SUPPORT LH
Remove the screw.
Using a screwdriver, disengage the 3 clips as shown in the illustration.
Disengage the 2 claws to remove the rear bumper side support LH.
52155A
14.REMOVE REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52592
15.REMOVE REAR BUMPER SIDE SEAL LH
| *A | w/o Mudguard |
w/o Mud guard:
Remove the screw.
Remove the 4 clips and rear bumper side seal LH.
52591
16.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52171A
17.REMOVE NO. 1 REAR BUMPER REINFORCEMENT
Remove the 6 nuts and No. 1 rear bumper reinforcement.