When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75444
1.INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 4 luggage compartment door plate.
Using a heat light, heat the vehicle body and No. 4 luggage compartment door plate.
Remove the release paper from the No. 4 luggage compartment door plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 luggage compartment door plate as shown in the illustration.
| *a | Edge of Curved Surface | *b | Profile of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 60 mm (2.36 in.) | B | 123 mm (4.84 in.) |
| C | 54 mm (2.13 in.) | D | 47 mm (1.85 in.) |
75444A
2.INSTALL NO. 4 BACK DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 4 back door name plate.
Using a heat light, heat the vehicle body and No. 4 back door name plate.
Remove the release paper from the No. 4 back door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 back door name plate as shown in the illustration.
| *a | Edge of Curved Surface | *b | Profile of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 36 mm (1.42 in.) | B | 38 mm (1.50 in.) |
| C | 122 mm (4.80 in.) | D | 33 mm (1.30 in.) |
75442
3.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
for HIGHLANDER Plate:
| *a | Edge of Curved Surface | *b | Profile of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 299 mm (11.8 in.) | B | 35 mm (1.38 in.) |
| C | 62 mm (2.44 in.) | - | - |
for KLUGER Plate:
| *a | Edge of Curved Surface | *b | Profile of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 197 mm (7.76 in.) | B | 35 mm (1.38 in.) |
| C | 60 mm (2.36 in.) | - | - |
75441E
4.INSTALL NO. 1 BACK DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 1 back door name plate.
Using a heat light, heat the vehicle body and No. 1 back door name plate.
Remove the release paper from the No. 1 back door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 back door name plate as shown in the illustration.
| *a | Edge of Curved Surface | *b | Profile of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 29 mm (1.14 in.) | B | 37 mm (1.46 in.) |
| C | 35 mm (1.38 in.) | - | - |
75741E
5.INSTALL SYMBOL EMBLEM