85110R
1.REMOVE REAR WIPER MOTOR ASSEMBLY
69806
2.REMOVE BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)
69370E
3.REMOVE BACK WINDOW LOCK ASSEMBLY (for Glass Hatch Type)
84280D
4.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
84270G
5.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure as for the LH side.
81590A
6.REMOVE REAR LIGHT ASSEMBLY LH
81580D
7.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
8.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
|
Protective Tape |
Apply protective tape around the back door outside garnish sub-assembly.
Disconnect the connector.
Remove the 3 nuts.
Disengage the 7 clips and remove the back door outside garnish sub-assembly.
Remove the 7 clips.
Remove the 3 gaskets.
84840G
9.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
75741E
10.REMOVE SYMBOL EMBLEM
|
Protective Tape |
Apply protective tape around the symbol emblem.
Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the symbol emblem.
Be careful not to damage the back door outside garnish.
76832B
11.REMOVE BACK DOOR FINISH PANEL COVER LH
Disengage the 2 claws and remove the back door finish panel cover LH.
76831B
12.REMOVE BACK DOOR FINISH PANEL COVER RH
Use the same procedure as for the LH side.
84840F
13.REMOVE GLASS HATCH OPENER SWITCH ASSEMBLY (for Glass Hatch Type)
76825
14.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR
Remove the back door outside garnish protector.
76822
15.REMOVE LOWER BACK DOOR GARNISH MOULDING PROTECTOR
Remove the lower back door garnish moulding protector.
Use the same procedure for the RH side and LH side.