11209
1.REMOVE V-BANK COVER SUB-ASSEMBLY
51441
2.REMOVE NO. 1 ENGINE UNDER COVER
3.DRAIN ENGINE COOLANT
53111
4.REMOVE RADIATOR GRILLE
17750A
5.REMOVE INLET AIR CLEANER ASSEMBLY
28800
6.REMOVE BATTERY
88211B
7.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
53510
8.REMOVE HOOD LOCK ASSEMBLY (for LHD)
53510
9.REMOVE HOOD LOCK ASSEMBLY (for RHD)
53205
10.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
16571C
11.DISCONNECT NO. 1 RADIATOR HOSE
Slide the clip and disconnect the No. 1 radiator hose.
12.DISCONNECT RADIATOR RESERVE TANK HOSE
Disconnect the radiator reserve tank hose.
32941
13.DISCONNECT INLET NO. 1 OIL COOLER HOSE
Disengage the clamp to disconnect the inlet No. 1 oil cooler hose from the fan shroud.
14.REMOVE FAN SHROUD ASSEMBLY
Disconnect the cooling fan ECU connector.
Disengage the 4 wire harness clamps.
Disengage the 3 claws.
Disengage the 3 guides to remove the fan shroud assembly from the radiator assembly.
Do not damage the radiator assembly when removing the fan shroud assembly.
16361
15.REMOVE FAN
Remove the nut and fan.
16361B
16.REMOVE NO. 2 FAN
Remove the nut and No. 2 fan.
16363
17.REMOVE COOLING FAN MOTOR
Disconnect the cooling fan motor connector and disengage the wire harness from the 2 clamps.
Remove the 3 screws and cooling fan motor.
16363A
18.REMOVE NO. 2 COOLING FAN MOTOR
Disconnect the No. 2 cooling fan motor connector and disengage the wire harness from the clamp.
Remove the 3 screws and No. 2 cooling fan motor.