Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR EVAPORATOR TEMPERATURE SENSOR
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109970 REAR EVAPORATOR TEMPERATURE SENSOR A

HEATING / AIR CONDITIONING  REAR EVAPORATOR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 82210L 1.INSTALL NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

a.

Engage the 2 claws.


b.

Install the rear cooling unit cover LH with the 12 screws.


c.

Engage each clamp to install the No. 2 air conditioning harness assembly.


d.

Connect the connector.


Hide 87106W 2.INSTALL REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

Hide 87107B 3.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.

Install the heater radiator unit sub-assembly.


b.

Install the 2 bushes.


c.

Install the clamp with the screw.


d.
E287896C01
0.25,3.5 0.656,3.573 false 2.781,3.573 3.167,3.5 false 2.094,0.208 2.25,0.406 0.156,0.198 10 true A 2.781,0.094 2.938,0.292 0.156,0.198 10 false B 0.167,2.583 0.479,2.781 0.313,0.198 10 false *a 1.833,2.583 2.146,2.781 0.313,0.198 10 false *b 0.083,3.385 0.396,3.583 0.313,0.198 10 false *c 3.188,3.375 3.375,3.573 0.188,0.198 10 false *d 1.99,3.083 2.302,3.281 0.313,0.198 10 false *e 1.302,3.083 1.615,3.281 0.313,0.198 10 false *e
*a View A
*b View B
*c Marking (Blue)
*d Marking (Pink)
*e Clip Installation Angle (60 to 120°)


Connect the heater water pipe and hose sub-assembly and engage the 2 clips within the area shown in the illustration.


e.
E287895

Install the heater water pipe and hose sub-assembly with the 2 screws.


f.

Install the bracket with the 3 screws.


g.

Install the cover with the 8 screws.


h.

Engage the 2 claws.


i.

Install the cover with the 4 screws.


j.

Install a new packing.


k.

Install a new packing.


Hide 88539K 4.CONNECT DRAIN COOLER HOSE

a.

Engage the clamp to connect the drain cooler hose.


Hide 87030A 5.INSTALL REAR COOLING UNIT ASSEMBLY