Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SRS SEAT CUSHION AIRBAG ASSEMBLY
RM3160E _58 Vehicle Interior _019710 SUPPLEMENTAL RESTRAINT SYSTEMS _0109991 SRS SEAT CUSHION AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  SRS SEAT CUSHION AIRBAG ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

If the front seat airbag sub-assembly RH was deployed, replace the front seat airbag sub-assembly RH, separate type front seat cushion spring assembly, separate type front seat cushion pad and separate type front seat cushion cover with the necessary parts in accordance with the extent of the collision damage.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY



PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL


Hide 71073S 2.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER RH

HINT:

Use the same procedure as for the LH side.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY

for Power Seat without Climate Control Seat System: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY

for Power Seat with Climate Control Seat System: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY


Hide 72525A 3.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY


Hide 71811D 4.REMOVE FRONT SEAT CUSHION SHIELD RH

Hide 71867C 5.REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Power Seat)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY


Hide 71861 6.REMOVE FRONT SEAT INNER CUSHION SHIELD RH

Hide 7.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY


Hide 8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH

Hide 73905 9.REMOVE FRONT SEAT AIRBAG SUB-ASSEMBLY RH

CAUTION:

When storing the front seat airbag sub-assembly RH, keep the airbag deployment side facing upward.


a.

for Manual Seat:

i.
B356691C01
1.688,1.552 1.844,1.75 0.156,0.198 10 false .
V100135

Seat Clamp


Separate the front seat airbag sub-assembly RH wire harness from the seat clamp.


ii.

Disengage the claw and 3 clamps.

HINT:

Disengage the 3 clamps first.




b.

for Power Seat:

i.
B355816C01
1.115,1.573 1.271,1.771 0.156,0.198 10 false .
V100135

Seat Clamp


Separate the front seat airbag sub-assembly RH wire harness from the seat clamp.


ii.

Disengage the claw and 3 clamps.

HINT:

Disengage the 3 clamps first.




c.
B356692

Remove the 3 nuts and front seat airbag sub-assembly RH.

CAUTION:
·

The nuts must not be reused.

·

Make sure that the separate type front seat cushion spring assembly is not deformed. If it is, replace it with a new one.