Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0110063 LANE DEPARTURE ALERT SYSTEM J

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  Indicator Circuit  


DESCRIPTION

When the lane departure warning camera detects a lane-keeping assist main switch signal, it sends the signal to the combination meter assembly via CAN communication. Then the lane departure alert indicator turns on.

CAUTION / NOTICE / HINT

NOTICE:

The lane departure alert system uses the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the lane departure alert system after confirming that the communication systems are functioning properly.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.PERFORM ACTIVE TEST USING GTS (MULTI-INFORMATION DISPLAY)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Combination Meter / Active Test.


e.

Perform Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Meter Display 1 Multi-information display OFF or All Confirm that the vehicle is stopped with the engine switch on (IG)
Body Electrical > Combination Meter > Active Test
Tester Display
Meter Display 1
50004 122 7
OK:

The multi-information display turns on or off.



Result:
Proceed to
OK
NG



OK

2.READ VALUE USING GTS (LDA INDICATOR)

NG

2.READ VALUE USING GTS (LDA INDICATOR)
a.

Enter the following menus: Chassis / Lane Departure Alert / Data List.


b.

Read the Data List according to the display on the GTS.

Chassis > Lane Departure Alert > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
LDA Indicator Status of the lane departure alert indicator Nothing or Green Nothing: Lane departure alert indicator not displayed
Green: Lane departure alert indicator displayed
-
Chassis > Lane Departure Alert > Data List
Tester Display
LDA Indicator
50003 355 7
OK:

When the lane departure alert main switch is operated, the display changes as shown above.



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG