Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019711 PRE-CRASH SAFETY _0110871 PRE-CRASH SAFETY SYSTEM C

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  C1A52  Driving Support ECU Communication Abnormal  


DESCRIPTION

The DTC C1A52 is stored when the ECM cannot recognize the driving support ECU assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1A52 Driving Support ECU Communication Abnormal When the engine switch is on (IG), the ECM cannot recognize the driving support ECU assembly
·

ECM

·

Driving support ECU assembly



PROCEDURE

1.CHECK FOR DTCs (PRE-CRASH 2)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).



d.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



e.

Enter the following menus: Body Electrical / Pre-Crash 2 / Trouble Codes.


f.

Check for DTCs.

Body Electrical > Pre-Crash 2 > Trouble Codes
50001 220
Result:
Result Proceed to
DTC C1A52 is not output A
DTC C1A52 is output B




A

B

2.REPLACE ECM
2.REPLACE ECM
a.

Replace the ECM with a new one.

Click hereEngine / Hybrid System>2GR-FE ENGINE CONTROL>ECM>COMPONENTS


Result:
Proceed to
NEXT



NEXT

3.CHECK FOR DTCs (PRE-CRASH 2)
3.CHECK FOR DTCs (PRE-CRASH 2)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).



d.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



e.

Enter the following menus: Body Electrical / Pre-Crash 2 / Trouble Codes.


f.

Check for DTCs.

Body Electrical > Pre-Crash 2 > Trouble Codes
50001 220
NOTICE:

When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.


Result:
Result Proceed to
DTC C1A52 is not output A
DTC C1A52 is output B




A

END (ECM WAS DEFECTIVE)

B