Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL › 2015.11–2016.11
RM3160E _51 Engine / Hybrid System _019663 2GR-FE ENGINE MECHANICAL _0109580 FRONT CRANKSHAFT OIL SEAL A

2GR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL TIMING CHAIN CASE OIL SEAL

a.
A124982C03
2.385,1.656 2.375,2.115 2.375,2.115 2.104,1.563 false 1.99,0.25 2.156,0.427 0.167,0.177 10 false *a 2.25,2.156 2.573,2.333 0.323,0.177 10 true SST
*a Oil Seal Installation Depth


Apply MP grease to the lip of a new timing chain case oil seal.


b.

Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.

SST
09223-22010  
09506-35010  

Oil Seal Installation Depth:

0 to 1.0 mm (0 to 0.0394 in.)


NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap in the timing chain case oil seal at an angle.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY

a.

Install the pulley set key to the crankshaft.


b.

Align the pulley set key with the key groove of the crankshaft pulley.


c.
A208602C03
2.146,1.833 2.563,0.875 2.563,0.875 2.333,2.115 false 0.385,2.615 0.469,3.031 true 0.396,0.635 0.396,0.354 0.396,0.354 1.792,0.354 true 0.479,0.615 0.479,0.354 false 2.469,0.698 2.927,1 0.458,0.302 10 false SST 0.438,3.052 0.604,3.229 0.167,0.177 10 true *a 1.875,0.281 2.333,0.583 0.458,0.302 10 false SST
*a Hold
V100135

Turn


Using SST, install the crankshaft pulley bolt.

SST
09213-70011  (09213-70020)
09330-00021  

Torque:
260 N*m (2651 kgf*cm, 192 ft.*lbf)