Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD) › from 2016.11
RM3160E _53 Suspension _019689 FRONT SUSPENSION _0295323 FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD) A

FRONT SUSPENSION  FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

Hide 48810 2.REMOVE FRONT STABILIZER LINK ASSEMBLY LH

a.
C291633

Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.



Hide 48820B 3.REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48829A 4.REMOVE FRONT NO. 1 STABILIZER BRACKET LH

a.
C291634

Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.


Hide 48824A 5.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48811 6.REMOVE FRONT STABILIZER BAR

a.

Remove the front stabilizer bar with 2 front No. 2 stabilizer brackets and 2 front No. 1 stabilizer bar bushings from the front frame assembly.


Hide 48828 7.REMOVE FRONT NO. 2 STABILIZER BRACKET LH

a.
C371244

Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.


Hide 48827 8.REMOVE FRONT NO. 2 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48815 9.REMOVE FRONT NO. 1 STABILIZER BAR BUSHING

a.

Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.