Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD) › from 2016.11
RM3160E _53 Suspension _019689 FRONT SUSPENSION _0295323 FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD) A

FRONT SUSPENSION  FRONT STABILIZER BAR(When Not Using the Engine Support Bridge for AWD)  INSTALLATION  


PROCEDURE

Hide 48815 1.INSTALL FRONT NO. 1 STABILIZER BAR BUSHING

a.
C371521C02
0.604,1.813 0.719,1.813 0.719,1.813 1.156,1.344 true 0.438,1.729 0.75,1.885 0.313,0.156 10 false *a
*a Cutout
V100135

Front of the Vehicle
V100136

Inside of the Vehicle


Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

NOTICE:

When installing the front No. 1 stabilizer bar bushings, make sure that the cutout is facing the rear of the vehicle.



Hide 48828 2.INSTALL FRONT NO. 2 STABILIZER BRACKET LH

a.

Install the front No. 2 stabilizer bracket LH to the front No. 1 stabilizer bar bushing.


Hide 48827 3.INSTALL FRONT NO. 2 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48811 4.INSTALL FRONT STABILIZER BAR

a.

Install the front stabilizer bar with 2 front No. 2 stabilizer brackets and 2 front No. 1 stabilizer bar bushings to the front frame assembly.


Hide 48829A 5.INSTALL FRONT NO. 1 STABILIZER BRACKET LH

a.

Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 48824A 6.INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48810 7.INSTALL FRONT STABILIZER LINK ASSEMBLY LH

a.

Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.

Torque:
74 N*m (755 kgf*cm, 55 ft.*lbf)

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.



Hide 48820B 8.INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 9.INSTALL ENGINE ASSEMBLY WITH TRANSAXLE