Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR(When Using the Engine Support Bridge for AWD) › from 2016.11
RM3160E _53 Suspension _019689 FRONT SUSPENSION _0295325 FRONT STABILIZER BAR(When Using the Engine Support Bridge for AWD) A

FRONT SUSPENSION  FRONT STABILIZER BAR(When Using the Engine Support Bridge for AWD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEELS

Hide 48810 2.REMOVE FRONT STABILIZER LINK ASSEMBLY LH

a.
C294391

Remove the 2 nuts and front stabilizer link assembly LH from the front shock absorber assembly and front stabilizer bar.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.



Hide 48820B 3.REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48811 5.REMOVE FRONT STABILIZER BAR

a.

Remove the front stabilizer bar with 2 front No. 2 stabilizer brackets and 2 front No. 1 stabilizer bar bushings from the vehicle body.


Hide 48829A 6.REMOVE FRONT NO. 1 STABILIZER BRACKET LH

a.

Remove the front No. 1 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.


Hide 48824A 7.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48828 8.REMOVE FRONT NO. 2 STABILIZER BRACKET LH

a.
C371244

Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.


Hide 48827 9.REMOVE FRONT NO. 2 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.


Hide 48815 10.REMOVE FRONT NO. 1 STABILIZER BAR BUSHING

a.

Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.