Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0096790 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  USB Audio System Recognition/Play Error  


DESCRIPTION

When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be recognized by the radio and display receiver assembly. This diagnosis procedure is for when a device is not recognized, or files from the device cannot be played normally.

WIRING DIAGRAM

E360450E03
0.854,0.594 1.313,0.792 0.458,0.198 10 false USV1 0.896,1.167 1.354,1.365 0.458,0.198 10 false US1- 0.865,1.792 1.323,1.99 0.458,0.198 10 false US1+ 0.854,2.427 1.313,2.625 0.458,0.198 10 false UGD1 0.865,3.031 1.323,3.229 0.458,0.198 10 false UJSS 3.292,2.854 4.177,3.094 0.885,0.24 10 false (Shielded) 5.958,0.594 6.417,0.792 0.458,0.198 10 false USV1 5.958,1.177 6.417,1.375 0.458,0.198 10 false US1- 5.948,1.813 6.406,2.01 0.458,0.198 10 false US1+ 5.948,2.427 6.406,2.625 0.458,0.198 10 false UGD1 5.958,3.042 6.417,3.24 0.458,0.198 10 false USG1 1.323,0.479 1.479,0.677 0.156,0.198 10 false 1 1.344,1.021 1.5,1.219 0.156,0.198 10 false 2 1.333,1.615 1.49,1.813 0.156,0.198 10 false 3 1.333,2.292 1.49,2.49 0.156,0.198 10 false 4 1.344,2.885 1.5,3.083 0.156,0.198 10 false 5 5.74,0.5 5.896,0.698 0.156,0.198 10 false 1 5.75,1.031 5.906,1.229 0.156,0.198 10 false 2 5.75,1.646 5.906,1.844 0.156,0.198 10 false 3 5.75,2.313 5.906,2.51 0.156,0.198 10 false 4 5.76,2.917 5.917,3.115 0.156,0.198 10 false 5 0.115,3.406 0.573,3.604 0.458,0.198 10 false F125 0.115,3.563 1.74,3.979 1.625,0.417 10 false No. 1 Stereo Jack Adapter Assembly 1.865,4.177 4.542,4.427 2.677,0.25 10 false : Date Signal (USB Communication Line) 5.385,3.417 6.573,3.771 1.188,0.354 10 false F113 5.385,3.573 7.063,3.979 1.677,0.406 10 false Radio and Display Receiver Assembly

CAUTION / NOTICE / HINT

HINT:
·

When a large amount of data is in a USB device, it may take a while to begin playback.

·

When using a USB device, files that are protected by copyright cannot be played.

·

When files are not played in the sorted order, perform the following procedure before inspection.

(a)

Add numbers in front of the file names.

(b)

Put the files in a folder and copy the folder data to the USB device.




PROCEDURE

1.CHECK USB DEVICE OR "iPod"
a.

Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.


b.

Check if playable files are present on the USB device or "iPod".

HINT:

Refer to System Description for playable files.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION



c.

Check if the USB device is a compatible format or "iPod" is a compatible version.

HINT:

Refer to System Description for compatible formats and versions.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION


Result:
Result Proceed to
No playable files exist, or incompatible device format or version. A
Playable files exist, and compatible device format or version. B




A

END (USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION IS INCOMPATIBLE, OR NO PLAYABLE FILES EXIST)

B

2.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
2.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the F113 radio and display receiver assembly connector.


b.

Disconnect the F125 No. 1 stereo jack adapter assembly connector.


c.
E331219C35
1.5,0.25 1.917,0.5 0.417,0.25 1.5,2.333 1.917,2.583 0.417,0.25 1.833,1.417 2.219,1.531 false 1.188,1.271 1.583,1.271 false 1.198,1.542 1.594,1.427 false 1.094,3.438 1.49,3.438 false 1.104,3.677 1.615,3.438 false 1.771,3.427 2.365,3.063 false 1.906,3.438 2.365,3.563 false 1.792,3.531 2.302,3.958 false 1.823,1.573 2.229,1.875 false 1.833,1.271 2.229,1.271 false 0.188,0.167 0.5,0.323 0.313,0.156 10 false *a 0.156,2.219 0.469,2.438 0.313,0.219 10 false *b 1.552,0.292 2.01,0.5 0.458,0.208 10 false F113 0.729,1.177 1.146,1.427 0.417,0.25 10 false UGD1 0.771,1.448 1.188,1.698 0.417,0.25 10 false US1+ 2.281,1.188 2.698,1.438 0.417,0.25 10 false USV1 2.281,1.458 2.698,1.708 0.417,0.25 10 false US1- 2.281,1.833 2.698,2.083 0.417,0.25 10 false USG1 2.417,2.969 2.833,3.219 0.417,0.25 10 false US1+ 2.427,3.49 2.844,3.74 0.417,0.25 10 false UGD1 2.354,3.896 2.771,4.146 0.417,0.25 10 false UJSS 0.677,3.354 1.094,3.604 0.417,0.25 10 false USV1 0.719,3.604 1.135,3.854 0.417,0.25 10 false US1- 1.552,2.375 1.979,2.583 0.427,0.208 10 false F125
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F125-1 (USV1) - F113-1 (USV1) Always Below 1 Ω
F125-2 (US1-) - F113-2 (US1-) Always Below 1 Ω
F125-3 (US1+) - F113-3 (US1+) Always Below 1 Ω
F125-4 (UGD1) - F113-4 (UGD1) Always Below 1 Ω
F125-5 (UJSS) - F113-5 (USG1) Always Below 1 Ω
F125-1 (USV1) or F113-1 (USV1) - Body ground Always 10 kΩ or higher
F125-2 (US1-) or F113-2 (US1-) - Body ground Always 10 kΩ or higher
F125-3 (US1+) or F113-3 (US1+) - Body ground Always 10 kΩ or higher
F125-4 (UGD1) or F113-4 (UGD1) - Body ground Always 10 kΩ or higher
F125-5 (UJSS) or F113-5 (USG1) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (NO. 1 STEREO JACK ADAPTER ASSEMBLY POWER SOURCE)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (NO. 1 STEREO JACK ADAPTER ASSEMBLY POWER SOURCE)
a.

Disconnect the F125 No. 1 stereo jack adapter assembly connector.


b.
E226479C77
1.5,0.917 1.917,1.167 0.417,0.25 1.906,2.083 2.302,2.323 false 1.521,2.083 1.104,1.917 false 1.552,0.958 1.969,1.167 0.417,0.208 10 false F125 2.344,2.302 2.771,2.521 0.427,0.219 10 false UGD1 0.688,1.802 1.167,2.021 0.479,0.219 10 false USV1 0.188,0.167 0.385,0.333 0.198,0.167 10 false *a
*a Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F125-1 (USV1) - F125-4 (UGD1) Ignition switch ACC 5 V



Result:
Proceed to
OK
NG



OK

4.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

4.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK
a.

Delete all files in the USB device or "iPod" and format/restore it.


b.

Save the data again and check if it can be played on the in-vehicle device.

NOTICE:

Formatting a USB device or restoring an "iPod" erases all music on the device. Ensure that a backup of the music data is available before performing this operation.


OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END

NG

5.REPLACE USB DEVICE OR "iPod"
5.REPLACE USB DEVICE OR "iPod"
a.

Turn the ignition switch off.

HINT:

When this malfunction occurs, it is necessary to turn the ignition switch off to make it possible for the vehicle to recognize a new device when it is connected.



b.

Turn the ignition switch to ACC.


c.

Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

HINT:
·

If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

·

Refer to System Description for compatible formats and versions.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION




Result:
Proceed to
NEXT



NEXT

6.CHECK USB DEVICE OR "iPod"
6.CHECK USB DEVICE OR "iPod"
a.

Check if a USB device or "iPod" is recognized by the radio and display receiver assembly, and if information such as track, artist and album names is displayed on the screen.

OK:

USB device or "iPod" is recognized properly and the information is displayed on the screen.



Result:
Proceed to
OK
NG



OK

USB DEVICE OR "iPod" WAS INCOMPATIBLE OR DEFECTIVE

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE