Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0096790 AUDIO AND VISUAL SYSTEM T

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be necessary. Refer to Precaution for Audio and Visual System.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>PRECAUTION


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area Link
Black screen (no image appears on the screen) Proceed to "Black Screen" Click here
Proceed to "Check Software Error History" in Operation Check Click here
Radio and display receiver assembly Click here
Display does not dim (does not change to night screen) with tail switch on Proceed to "Display does not Dim when Light Control Switch is Turned ON" Click here
Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here
Power does not turn off (screen remains on) Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Screen is distorted Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Parking brake switch signal does not change in vehicle signal check mode Proceed to "Parking Brake Switch Circuit" Click here
Radio and display receiver assembly Click here
Reverse signal does not change in vehicle signal check mode Proceed to "Reverse Signal Circuit" Click here
Radio and display receiver assembly Click here

General Audio Function
Symptom Suspected Area Link
Pressing power switch does not turn on system Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
No sound can be heard from speakers Proceed to "No Sound can be Heard from Speakers" Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Telematics Transceiver"* Click here
Proceed to "Speaker Circuit" Click here
Telematics transceiver* Click here
Radio and display receiver assembly Click here
Abnormal noise occurs Proceed to "Noise Occurs" Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Telematics Transceiver"* Click here
Telematics transceiver* Click here
Radio and display receiver assembly Click here
Sound quality is bad in all modes (volume is too low) Check that the ASL function is off -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Telematics Transceiver"* Click here
Proceed to "Speaker Circuit" Click here
Telematics transceiver* Click here
Radio and display receiver assembly Click here
ASL does not function Check that the ASL function is on -
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter" Click here
Radio and display receiver assembly Click here
Voice guidance does not function (w/ Voice Guidance Function) Proceed to "Voice Guidance does not Function" Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Telematics Transceiver"* Click here
Proceed to "Speaker Circuit" Click here
Telematics transceiver* Click here
Radio and display receiver assembly Click here

*: w/ Manual (SOS) Switch


Panel Switch and Touch Panel Switch Function
Symptom Suspected Area Link
Illumination for panel switches does not come on with tail switch on Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" Click here
Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here
Panel switches do not function Proceed to "Panel Switches do not Function" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Touch panel switch does not function Proceed to "Touch Panel Switch does not Function" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here

Steering Pad Switch Function
Symptom Suspected Area Link
System cannot be operated by steering pad switch Proceed to "Panel Switches do not Function" Click here
Proceed to "Steering Pad Switch Circuit" Click here
Radio and display receiver assembly Click here
Illumination for steering pad switch does not come on with tail switch on Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here

FM or AM Radio Function
Symptom Suspected Area Link
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" Click here
Radio broadcast can be received but radio station cannot be displayed (some radio stations do not provide their name information) Radio and display receiver assembly Click here
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers Operate the volume switch and turn up the volume level -
Radio and display receiver assembly Click here

CD Player Function
Symptom Suspected Area Link
CD cannot be played or player does not function with disc Proceed to "Disc Player Outline" in System Description and check if the CD is compatible with the CD player Click here
Proceed to "Check Optical Disc Error History" in Operation Check Click here
Radio and display receiver assembly Click here
CD cannot be inserted/played or CD is ejected right after insertion Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion" Click here
CD cannot be ejected Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD cannot be Ejected" Click here
CD sound skips Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD Sound Skips" Click here
Sound quality is bad only when CD is played (volume is too low) Change the sound settings on the adjustment screen -
Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" Click here
When CD is playing, some cover art is not displayed When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed -
When CD is playing, cover art cannot be displayed Radio and display receiver assembly Click here
Album cover art cannot be displayed Check that display cover art on the CD settings screen is set to on -
Check if similar symptoms occur with another vehicle -
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version. -
Radio and display receiver assembly Click here

AUX Function
Symptom Suspected Area Link
External device sound cannot be heard or sound quality is bad (stereo jack is used) Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
"AUX/VTR" is not displayed on system check mode screen Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here

USB Audio System Function
Symptom Suspected Area Link
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
USB device or "iPod" is not recognized Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Track information such as track, artist and album names is not displayed Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
USB device or "iPod" is recognized but cannot play or play in a sorted order Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Album cover art cannot be displayed Check that display cover art on the USB device or "iPod" settings screen is set to on -
Check if similar symptoms occur with another vehicle -
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version -
Radio and display receiver assembly
User set album cover art cannot be displayed Check if the priority display of Gracenote database album cover art setting is off -
Check that a JPEG file is used for the album cover art registered to the music data in the "iPod" -
Radio and display receiver assembly Click here
"iPod" battery cannot be charged Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Screen is distorted or not displayed only when using the video function of an "iPod" Check if "iPod" is set to output images -
Check if the appropriate image signal setting (NTSC/PAL) is selected -
Check if video sound input is set to A/V mode -
Connect using a known good cable and check if the image is output -
Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Screen is distorted or not displayed only when using the USB device connected to the No. 1 stereo jack adapter assembly (w/o Toyota Link Function) Check if the appropriate image signal setting (NTSC/PAL) is selected -
Check if video sound input is set to A/V mode -
Connect a known good USB device to the No. 1 stereo jack adapter assembly and check if the image is output -
Connect using a known good cable and check if the image is output -
Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here

Voice Recognition Function (w/ Voice Recognition Function)
Symptom Suspected Area Link
Voice menu screen is not displayed (voice recognition function does not turn on) Check if the voice recognition prompts function is on -
Proceed to "Panel Switches do not Function" Click here
Proceed to "Steering Pad Switch Circuit" Click here
Radio and display receiver assembly Click here
When voice recognition switch is pressed, a short beep is emitted but voice cannot be recognized properly Proceed to "Voice is not Recognized" Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver" Click here
Radio and display receiver assembly Click here

"Bluetooth" Hands-free Function
Symptom Suspected Area Link
"Bluetooth" is inoperative (in-vehicle device cannot be recognized by the cellular phone) Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be registered Proceed to "Cellular Phone Registration Failure" Click here
"Bluetooth" compatible cellular phone cannot be connected Check that no other cellular phone is connected as a hands-free device -
Bring the cellular phone near the in-vehicle device and reconnect it -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually) Check that "Bluetooth" automatic connection setting of the in-vehicle device is on -
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone connection is disconnected Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Message that prompts to check the cellular phone is displayed Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed Turn the cellular phone connection conformation display on the in-vehicle device off -
Phonebook data cannot be transferred Check that the phonebook data automatic transfer setting of the in-vehicle device is on -
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required) -
Check that no applications on the cellular phone are running -
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation -
Transfer phonebook data manually -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Phonebook data is cleared Radio and display receiver assembly Click here
Phonebook data cannot be edited Check that the phonebook data automatic transfer setting of the in-vehicle device is off -
Radio and display receiver assembly Click here
All the transferred phonebook data is sorted to "Other" Check that no applications on the cellular phone are running -
Check that phonebook data in the cellular phone is not stored to the SIM card -
Proceed to "Cellular Phone Inspection" Click here
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on the cellular phone -
Cellular phone cannot make outgoing/incoming calls Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again -
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth" -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Other caller's voice is interrupted by noise or sound quality is poor Check the receiving voice volume (if it is too high, voice may sound distorted) -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Other caller's voice cannot be heard Check that reception voice volume is not set to minimum -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Caller's voice (your voice) is interrupted by noise or sound quality is poor Check the transmitting voice volume (if it is too high, voice may sound distorted) -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver" Click here
Radio and display receiver assembly Click here
Other caller cannot hear your voice When talking on the cellular phone, check that the mute button is not pressed -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver" Click here
Radio and display receiver assembly Click here
No notification when a new SMS/MMS/e-mail has been received* Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Received SMS/MMS/e-mail cannot be read* Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
SMS cannot be replied to* Move the vehicle into a cellular phone service area, and check the operation of the radio and display receiver assembly and cellular phone -
Check that the cellular phone can send an SMS/MMS/e-mail -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here

*: w/ SMS/MMS/e-mail Function


"Bluetooth" Audio Function
Symptom Suspected Area Link
Portable player cannot be registered Proceed to "Portable Player cannot be Registered" Click here
Radio and display receiver assembly Click here
Portable player cannot be connected manually/automatically Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Radio and display receiver assembly Click here
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth" Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Radio and display receiver assembly Click here
Sound of portable player cannot be heard from speakers, or sound is low Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" Click here
Radio and display receiver assembly Click here
Portable player does not play even after "Bluetooth" audio mode is selected Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Radio and display receiver assembly Click here
Portable player does not play Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Radio and display receiver assembly Click here
Track information such as track number, track name, elapsed play time and playlist is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Operation switches for portable player such as play, pause, repeat and random are not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Battery condition of portable player is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
"Bluetooth" signal condition is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Portable player cannot pause, select file, fast forward, fast rewind, play at random Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Noise occurs or sound skips when portable player plays Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" Click here
Radio and display receiver assembly Click here
Registered device cannot be deleted Proceed to "Registered Device cannot be Deleted" Click here
Radio and display receiver assembly Click here

Fuel Consumption Function
Symptom Suspected Area Link
Graph is not displayed on "Trip Information" screen Recheck with the engine running -
Radio and display receiver assembly Click here
Cruise range is not displayed on "Trip Information" screen Turn the ignition switch to ON and recheck -
Radio and display receiver assembly Click here
Graph is not updated on "Past record" screen even though "Clear" is selected Turn the ignition switch to ON and recheck -
Radio and display receiver assembly Click here
Graph is not displayed on "Past record" screen Turn the ignition switch to ON and recheck -
Radio and display receiver assembly Click here

"MirrorLink" Function (w/ "MirrorLink" Function)
Symptom Suspected Area Link
Although USB device or "iPod" is recognized, "MirrorLink" function cannot be started (smartphone battery can be charged) Proceed to "MirrorLink Function cannot be Started" Click here
Image is not displayed Proceed to "MirrorLink Image is not Displayed" Click here
Sound cannot be heard Proceed to "MirrorLink Sound cannot be Heard" Click here
"MirrorLink" is inoperative only when smartphone is connected to head unit Proceed to "MirrorLink is Inoperative" Click here

Toyota Link Function (w/ Toyota Link Function)
Symptom Suspected Area Link
A Toyota Link system error message is displayed on the screen Follow the on screen instructions -
Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Radio and display receiver assembly Click here
Toyota Link apps and services are not operating as expected Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Radio and display receiver assembly Click here
Toyota Link voice recognition is not possible (voice recognition on the audio and visual system is normal) Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Radio and display receiver assembly Click here
Poor sound quality of Toyota Link system Confirm that cellular phone handset volume is turned up -
Confirm that adequate signal is maintained during driving -
Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Radio and display receiver assembly Click here