PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
After the engine switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) battery terminal.
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the terminal is reconnected.
PRECAUTION FOR NAVIGATION SYSTEM
If replacing any of the following parts, refer to Initialization of Repair Instruction.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
Telematics transceiver*1
Parking assist ECU*2
*1: w/ Manual (SOS) Switch
*2: w/ Panoramic View Monitor System