Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › 2016.11–2017.10
RM3160E _58 Vehicle Interior _019716 INTERIOR PANELS / TRIM _0107108 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 86101J 1.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Normal Roof)

Hide 86101J 2.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Sliding Roof)

Hide 86300B 3.REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY

Hide 863C0 4.REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY (w/ DAB Function)

Hide 5.REMOVE REAR WASHER HOSE ASSEMBLY (for Normal Roof)

a.

w/ Adhesive Tape:

i.

Remove the adhesive tape from the roof headlining assembly.

B367802C01
2.552,1.448 2.813,1.677 0.26,0.229 12 true *A
*A w/ Adhesive Tape - -




b.

Remove the rear washer hose assembly from the roof headlining assembly.


Hide 6.REMOVE REAR WASHER HOSE ASSEMBLY (for Sliding Roof)

a.

w/ Adhesive Tape:

i.

Remove the adhesive tape from the roof headlining assembly.

B367799C01
2.531,1.448 2.792,1.688 0.26,0.24 12 true *A
*A w/ Adhesive Tape - -




b.

Disengage each clamp and remove the rear washer hose assembly from the roof headlining assembly.


Hide 7.REMOVE AIR DUCT SEAL

HINT:

Use the same procedure for all air duct seals.


a.
B360488

Remove the air duct seal.


Hide 81390C 8.REMOVE SPOT LIGHT ASSEMBLY LH

Click hereVehicle Interior>LIGHTING (INT)>ROOM LIGHT>REMOVAL

HINT:

Use the same procedure for the front side and rear side.


Hide 81360K 9.REMOVE SPOT LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 63398 10.REMOVE ROOF HEADLINING SUPPORT PLATE (for Normal Roof)

a.

Remove the 2 roof headlining support plates.

B360490


Hide 63398 11.REMOVE ROOF HEADLINING SUPPORT PLATE (for Sliding Roof)

a.

Remove the 2 roof headlining support plates.

B360492


Hide 82171 12.REMOVE NO. 1 ROOF WIRE (for Normal Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B456072C01
1.031,0.698 0.823,0.427 0.823,0.427 1.292,0.563 true 0.24,0.25 0.583,0.479 0.344,0.229 12 false *A 0.25,1.583 0.667,1.917 0.417,0.333 12 false *B 0.594,0.313 0.99,0.563 0.396,0.25 12 false *C
*A w/o Pre-collision System *B w/ Pre-collision System
*C w/ Rain Sensor - -
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

B456073C01
0.979,0.698 0.74,0.438 true 0.25,0.25 0.667,0.583 0.417,0.333 12 false *A 0.25,1.583 0.667,1.917 0.417,0.333 12 false *B 0.521,0.333 0.917,0.667 0.396,0.333 12 false *C 2.313,2.896 2.49,3.063 0.177,0.167 10 true *a 2.313,1.167 2.49,1.333 0.177,0.167 10 true *a
*A w/o Pre-collision System *B w/ Pre-collision System
*C w/ Rain Sensor - -
*a 45° - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 13.REMOVE NO. 1 ROOF WIRE (for Sliding Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B456074C01
1.042,1.844 0.854,1.635 0.854,1.635 1.271,1.698 true 1.271,3.458 0.865,3.563 0.865,3.563 1.021,3.354 true 0.25,0.25 0.667,0.667 0.417,0.417 12 false *A 0.25,1.427 0.75,1.833 0.5,0.406 12 false *B 0.635,1.531 1.052,1.854 0.417,0.323 12 false *C 0.635,3.469 1.115,3.792 0.479,0.323 12 false *D 3.677,1.427 4.094,1.75 0.417,0.323 12 false *E
*A w/o Pre-collision System *B w/ Pre-collision System
*C for LHD with Rain Sensor *D for RHD with Rain Sensor
*E w/ Rear Seat Entertainment System - -
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

B456075C01
0.75,1.958 0.969,1.76 true 0.917,3.333 0.74,3.531 true 0.24,0.25 0.583,0.563 0.344,0.313 12 false *A 0.25,1.5 0.667,1.833 0.417,0.333 12 false *B 0.531,1.875 0.896,2.167 0.365,0.292 12 false *C 0.531,3.438 0.948,3.771 0.417,0.333 12 false *D 2.385,1.219 2.552,1.396 0.167,0.177 10 true *a 2.385,2.719 2.552,2.896 0.167,0.177 10 true *a
*A w/o Pre-collision System *B w/ Pre-collision System
*C for LHD with Rain Sensor *D for RHD with Rain Sensor
*a 45° - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.