Wear protective gloves. Sharp areas on the parts may injure your hands.
A lumbar support adjuster assembly is available only for the driver side.
Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
71759B
1.INSTALL FRONT SEATBACK HOOK
72760D
2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY
Engage the 2 guides to install the lumbar support adjuster assembly to the front seatback frame sub-assembly.
Engage the 2 claws.
Engage the clamp.
Connect the lumbar support adjuster assembly connector.
71587B
3.INSTALL FRONT SEATBACK EDGE PROTECTOR
4.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
71930A
5.INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY
6.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71812D
7.INSTALL FRONT SEAT CUSHION SHIELD
71862
8.INSTALL FRONT SEAT INNER CUSHION SHIELD
71074S
9.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System)
71074S
10.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System)
11.INSTALL FRONT SEAT ASSEMBLY